Nissan Rogue manuals

Nissan Rogue Service Manual: System description

STRUCTURE AND OPERATION

Sectional View

PART OF JOINT

Universal Type (Shell Type)

Universal Type (Shell Type)

CVJ Type

CVJ Type

Preparation
Commercial Service Tools Tool name Description Power tool Loosening bolts and nuts ...

Symptom diagnosis
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts. ...

Other materials:

Brake pedal
Inspection BRAKE PEDAL HEIGHT Check the brake pedal height (H) between the dash lower panel (3) and the brake pedal upper surface. CAUTION: Check the brake pedal height with the floor trim removed. Brake pedal height (H) from dash lower panel (3) Refer to BR-54, "Brake Peda ...

VIN registration
Description VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced. NOTE: Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). Work Procedure 1.CHECK VIN Check the VIN of the vehicle and note it. ...

ECU diagnosis information
FRONT AIR CONTROL Reference Value TERMINAL LAYOUT PHYSICAL VALUES DTC Inspection Priority Chart If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart. Priority Detected items (DTC) 1 ...

В© 2014-2025 Copyright www.nirogue.com