Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Unbalance Steering Wheel Turning Force and Return Between Right and Left

Nissan Rogue (T33) 2021-Present Service Manual / Steering :: Steering Control System / Symptom Diagnosis :: Unbalance Steering Wheel Turning Force and Return Between Right and Left

Description

Unbalance steering wheel turning force and return between right and left.

Diagnosis Procedure

PERFORM SELF-DIAGNOSIS

CONSULT

  1. Pull the parking brake switch.

    NOTE:

    Check to make sure that the parking brake switch indicator is turned ON.

  2. Ignition switch OFF.

  3. Get out of the Nissan Ariya vehicle and close all doors.

  4. Wait 65 seconds.

    NOTE:

    • Check to make sure that the parking brake switch indicator is turned OFF.

    • If the rear brake calipers are hot, wait up to an hour until parking brake indicator light on the switch turns OFF. Once indicator light on the switch turns OFF, move to next step.

  5. Ignition switch ON.

  6. Perform self diagnosis for “EPS/Direct Adaptive Steering 3”.

Is a malfunctioning system displayed?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

GO TO 2.

CHECK THE ILLUMINATION OF THE POWER STEERING WARNING LAMP

Check the power steering warning lamp while engine is running.

Does the power steering warning lamp turn OFF?

YES>>

GO TO 3.

NO>>

Refer to Diagnosis Procedure.

CHECK WHEEL ALIGNMENT

Check the wheel alignment. Refer to Inspection.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Adjustment of wheel alignment. Refer to Adjustment.

CHECK POWER STEERING CONTROL MODULE SIGNAL

CONSULT

  1. Start the engine.

    CAUTION:

    Never drive the Nissan Ariya vehicle.

  2. Turn steering wheel from full left stop to full right stop.

  3. Select “EPS/Direct Adaptive Steering 3”, “Data Monitor” and “Steering torque” in this order.

  4. Check that the signal is within the specified value. Refer to Reference Value.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Replace the power steering control module (steering gear assembly). Refer to Removal and Installation.

CHECK STEERING WHEEL TURNING FORCE

Check the steering wheel turning force. Refer to Inspection.

Is the check result normal?

YES>>

Inspection End.

NO>>

It is possible that there is a mechanical malfunction. Check the steering system. Refer to Inspection.

    Symptom Diagnosis. Steering Wheel Turning Force Is Heavy or Light
    Description Steering wheel turning force is heavy or light. Diagnosis Procedure PERFORM SELF-DIAGNOSIS CONSULT Pull the parking brake switch. NOTE: Check to make sure that the p...
    Removal and Installation. Power Steering Control Module
    Removal and Installation The power steering control module is an integral part of the steering gear and linkage. If the replacement of the power steering control module is neces...

    Other materials:

    U02bb Can Communication
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U02BB 00 Lost comm with EVAP sys purge pump (Lost comm with EVAP sys purge pump) Diagnosis condition Ignition switch ON Signal (terminal) Signal voltage ...

    C1041-55 Configuration
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1041 55 Configuration (Configuration) Diagnosis condition When ignition switch is ON. When the power supply voltage is normal. Signal (termi ...

    Fonctionnement du système RCTA
    Témoin lumineux latéral Écran d’informations du véhicule Commandes au volant (côté gauche) Le système RCTA avertit le conducteur lorsqu’un véhicule approche pendant une sortie de stationnement en marche arrière. Il fonctionne lorsque le levier de vitesses est en positio ...