Nissan Rogue (T33) 2021-Present Service Manual: Basic Inspection :: Instructions for Releasing Parking Brake Where Parking Brake Switch Cannot Be Used

Nissan Rogue (T33) 2021-Present Service Manual / Brakes :: Parking Brake System / Basic Inspection :: Instructions for Releasing Parking Brake Where Parking Brake Switch Cannot Be Used

Description

Disconnecting the 12V battery negative terminal with the parking brake on, prevents the parking brake from releasing. Releasing is performed mechanically. Refer to Work Procedure.

Work Procedure

DISCONNECT PARKING BRAKE ACTUATOR HARNESS CONNECTOR

  1. Disconnecting the 12V battery negative terminal.

  2. Disconnect the parking brake actuator harness connector from the rear brake caliper assembly .

>>

GO TO 2.

REMOVE PARKING BRAKE ACTUATOR

Remove the parking brake actuator from the rear brake caliper assembly .

>>

GO TO 3.

RELEASE OF PARKING BRAKE

Rotate the rear brake caliper assembly spindle part clockwise.

Is the parking brake released?

YES>>

GO TO 4.

NO>>

Check the rear brake caliper assembly. Refer to Inspection and Adjustment.

REPLACE REAR BRAKE CALIPER ASSEMBLY

Replace the rear brake caliper assembly. Refer to Removal and Installation.

CAUTION:

Never reuse the parking brake actuator.

>>

End of work.

    Basic Inspection. Diagnosis and Repair Work Flow
    Work Flow DETAILS OF TROUBLE DIAGNOSIS FLOWCHARTCOLLECT THE INFORMATION FROM THE CUSTOMER It is also important to clarify customer concerns before starting the inspection. First...
    Dtc/circuit Diagnosis. Parking Brake Switch
    Component Inspection CHECK PARKING BRAKE SWITCH Disconnect the 12V battery negative terminal. Disconnect the parking brake switch harness connector. Check the continuity when pa...

    Other materials:

    Chassis Can Communication 3 Circuit
    Diagnosis Procedure CHECK CAN DIAGNOSIS Check the "Network Diagnosis" results from CONSULT to see that the ITS CAN communication 1 circuit, ITS CAN communication 4 circuit and diagnostic CAN communication circuit have no malfunction. Are the ITS CAN communication 1 circuit, ITS CAN communicat ...

    Fonctionnement du système MOD (modèles sans vue en 3D)
    Le système de détection d’objets en mouvement (MOD) du Nissan Rogue s’active automatiquement dans les conditions suivantes, afin d’assister le conducteur lors des manœuvres à basse vitesse : Lorsque le levier de changement de vitesses est placé sur la position R (marche arrière). ...

    P046e Egr Differential Pressure Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P046E 00 EGR SENSOR B (EGR sensor B circuit range/performance) Diagnosis condition — Signal (terminal) — Threshold ECM detects the followi ...