Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shapes of tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description
— (J-46534) Trim Tool Set

Removing trim components

Commercial Service Tool

(TechMate No.) Tool name Description
( — ) Power Tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Periodic maintenance
IN-CABIN MICROFILTER Removal and Installation REMOVAL  Release the tab and remove the in-cabin microfilter cover (1) from under the RH side of the instrument panel. CAUTION: Use care ...

Other materials:

Precautions when starting and driving
WARNING  Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on h ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description Refer to LAN-8, "System Description". DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by p ...

Vehicle Dynamic Control (VDC) off switch
Vehicle Dynamic Control (VDC) off switch The vehicle should be driven with the VDC system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depre ...

© 2014-2019 Copyright www.nirogue.com