Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description
— (J-46532) Brake height tool

Measuring brake pedal height
38-PFM92 ( — ) ProCut™ PFM Series Lathe

Refinishing rotors

Commercial Service Tool

Tool name Description
1. Flare nut crowfoot
2. Torque wrench

Installing brake piping
a: 10 mm (0.39 in)/12 mm (0.47 in)
Power tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIO ...

Symptom diagnosis
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts. ×: Applicabl ...

Other materials:

Precaution
Precautions for trouble diagnosis CAUTION:  Never apply 7.0 V or more to the measurement terminal.  Use a tester with open terminal voltage of 7.0 V or less.  Turn the ignition switch OFF and disconnect the battery cable from the negative terminal when checking the harne ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description Refer to LAN-8, "System Description". DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by p ...

Recommended fluids/lubricants and capacities
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.   Capacity (Approximate) Recommended F ...

© 2014-2019 Copyright www.nirogue.com