Nissan Rogue Owners Manual: Phone settings
To access the phone settings:
- Press the [
] button.
- Touch the “Settings” key.
- Touch the “Phone & Bluetooth” key.
- . Touch the “Phone Settings” key and adjust
the following settings as desired:
- Sort Phonebook By:
Touch “First Name” or “Last Name” to
choose how phonebook entries are alphabetically
displayed on the screen.
- Use Phonebook From:
Touch “Handset” to use the phone’s phonebook.
Select “SIM” to use the phonebook on
the SIM card. Select “Both” to use both
sources.
- Download Phonebook Now:
Touch to download the phonebook to the
vehicle from the chosen source.
- Record Name for Phonebook Entry:
Touch to record a name for a phonebook
entry for use with the NISSAN Voice Recognition
System.
- Phone Notifications for:
Touch “Driver” to have phone notifications
shown in the vehicle information display. Select
“Both” to have phone notifications
shown in both the vehicle information display
and the center display screen.
- Text Messaging:
Touch to toggle the text message functionality
on or off.
- Show Incoming Text for:
Touch “Driver” to have incoming text notifications
shown in the vehicle information display.
Select “Both” to have text notifications
shown in both the vehicle information display
and the center display screen. Select “Off”
to turn off all text notifications.
- Auto Reply:
Touch to toggle the auto reply functionality
on or off.
- Auto Reply Message:
Touch to indicate preferred message to be
sent when “Auto Reply” function is activated.
- Use Vehicle’s Signature:
Touch to toggle on or off the addition of the
vehicle signature to outgoing messages.
- Custom Text Messages:
Touch this option to select a custom message
to edit. There are four customer message
slots available.
WARNING
Laws in some jurisdictions may restrict
the use of “Text-to-Speech”. Check local
regulations before using this feature.
Laws in some jurisdictions may re ...
Bluetooth® settings
To access the phone settings:
Press the [ ] button.
Touch the “Settings” key.
Touch the “Phone & Bluetooth” key.
Menu Item
...
Other materials:
Diagnosis system (TCM)
DIAGNOSIS DESCRIPTION
DIAGNOSIS DESCRIPTION : 1 Trip Detection Diagnosis and 2 Trip Detection
Diagnosis
NOTE:
“Start the engine and turn OFF the ignition switch after warm-up.” This is
defined as 1 trip.
1 TRIP DETECTION DIAGNOSIS
When initial malfunction is detected, TCM memorizes DTC. ...
C1606 EPS motor
DTC Logic
DTC DETECTION LOGIC
DTC
Display item
Malfunction detected condition
Possible cause
C1606
EPS MOTOR
When the motor driver malfunction of EPS control
unit or EPS motor malfunction is detected.
Harness or connector
EPS ...
DTC/circuit diagnosis
P1610 LOCK MODE
Description
ECM forcibly switches to the mode that inhibits engine start, when engine
start operation is performed 5 times
or more while communication between ECM and BCM is not normal.
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC B1610 is displayed with DTC U1000, fi ...
© 2014-2021 Copyright www.nirogue.com