Nissan Rogue manuals

Nissan Rogue Service Manual: Noise, vibration and harshness (NVT) troubleshooting

Nissan Rogue Service Manual / Suspension / Road Wheels & Tires / Symptom diagnosis / Noise, vibration and harshness (NVT) troubleshooting

NVH Troubleshooting Chart

Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts.

NVH Troubleshooting Chart

×: Applicable

Easy fill tire alert does not activate
Description The easy fill tire alert does not function while inflating a tire when the select lever position is in P-range with the power switch ON or with the vehicle set to READY. NOTE: &nb ...

Periodic maintenance
...

Other materials:

C1111 pump motor
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1111 PUMP MOTOR When a malfunction is detected in motor or motor relay. Harness or connector  ABS actuator and electric unit (control unit) &nb ...

Operation
Switch Name and Function STEERING SWITCH No. Switch name Operation Description 1 Enter/Up/Down switch Press The information display settings can be changed. 2 Display switch 3 Back switch METER CONTROL SWITCH No. Sw ...

BSW system operation
BSW system operation The BSW system operates above approximately 20 MPH (32 km/h). When the camera unit detects vehicles in the detection zone, the Blind Spot indicator light located inside the outside mirrors will illuminate. If the turn signal is then activated, the system chimes (twi ...

© 2014-2019 Copyright www.nirogue.com