Nissan Rogue manuals

Nissan Rogue Owners Manual: Instrument panel

Instrument panel

  1. Vent
  2.  Headlight/fog light (if so equipped)/turn signal switch
  3.  Meters, gauges, warning/indicator lights and Vehicle Information Display
  4.  Windshield wiper/washer switch and rear window wiper/washer switch  /Ignition switch (if so equipped)
  5.  Push-button ignition switch (if so equipped)
  6.  Vent
  7.  Hazard warning flasher switch
  8.  Radio /Navigation system* (if so equipped)
  9.  Front passenger supplemental air bag
  10.  Glove box
  11.  Heater and air conditioning controls
  12.  Power outlet
  13.  Shift lever
  14.  Auxiliary jack /USB port
  15.  Front passenger air bag status light
  16.  Cruise control main/set switches (/Bluetooth Hands-Free Phone System (if so equipped)
  17.  Driver supplemental air bag/Horn (, )
  18.  Control panel and Vehicle Information Display switches
  19.  Hood release /Fuel door release
  20. Vehicle Dynamic Control (VDC) OFF switch  Sport mode switch  ECO mode switch (if so equipped)  Power liftgate switch (if so equipped) (P.3-28) Power liftgate main switch (if so equipped)  Warning systems switch (if so equipped)  All-Wheel Drive (AWD) lock switch (if so equipped)  Hill descent control switch (if so equipped)
  21.  Instrument brightness control /Twin trip odometer reset switch

*: Refer to the separate Navigation System Owner’s Manual (if so equipped).

Refer to the page number indicated in parentheses for operating details.

Passenger compartment
Glove box  Map lights  Console box  Power panoramic moonroof (if so equipped)  Luggage hooks  Center armrest (2nd row)  Seats  Cup holders ...

Engine compartment check locations
QR25DE engine  Engine coolant reservoir  Engine oil filler cap  Brake fluid reservoir Battery  Air cleaner  Fuse/Fusible link box  Radiator cap ...

Other materials:

Rear power window switch
Removal and Installation REMOVAL  Remove screw cover (1). Remove screw (A). Release pawls using a suitable tool (A) and remove rear power window switch finisher (1). : Pawl Disconnect harness connector from rear power window switch. Release the pawls, then sep ...

P0138 HO2S2
DTC Description DTC DETECTION LOGIC The heated oxygen sensor 2 has a much longer switching time between rich and lean than the air fuel ratio (A/ F) sensor 1. The oxygen storage capacity of the three way catalyst (manifold) causes the longer switching time. MALFUNCTION A To judge the malfu ...

P2814 select solenoid
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2814 SELECT SOLENOID (Select solenoid) When all of the following conditions are satisfied and this state is maintained for 0.48 seconds: &n ...

© 2014-2018 Copyright www.nirogue.com